1,The Introduction of 3102 Micro Channel Multiport Extruded Aluminium Tube
3102 aluminum alloy is an AL-Mn series alloy, which is a widely used rust-proof alumin,it has high plasticity, good welding performance, higher strength than 1 series aluminum alloy, and corrosion resistance is similar to that of 1 series aluminum alloy,is a medium-strength aluminum alloy with good corrosion resistance, so it has a wide range of uses and large amounts. It can be used to process porous microchannel aluminum flat tubes that require good forming properties, high corrosion resistance, or good weldability.
2.The Specifications of 3102 Micro Channel Multiport Extruded Aluminium Tube
The specific specifications are as follows:
1) Alloy: 3102
2) Temper: O / F / H111 / H112
3) Width: 6mm-240mm
4) Height: Above 0.8mm
5) Wall thickness:Above 0.12mm
6) Number of Ports: 2-75 Ports or according to customer drawing requirements
7) Delivery status: Coiled Flat Tubes or cut into different lengths according to customer requirements.
Length: 50-6000mm
8) The Specifications of Coiled aluminum flat tube:
Reel inner diameter: 400-550mm, etc.
Reel outer diameter: 700-1500mm, etc.
Reel height / width: 300-1000mm, etc.
Zinc layer weight: 6-8g / ㎡ or according to customer requirements
9) The product specification deviations see as below (The cross-sectional views see as below):
10)The chemical composition of 3102 Micro-channel Aluminum Tubes is as follows:
11)The mechanical properties of 3102 Aluminum micro channel Tubes in room temperature are as follows
12)The Pressure resistance of 3102 Micro Channel Multiport Extruded Aluminium Tube
For flat tubes of water (oil) medium heat exchangers for automobile air conditioners, household or commercial air conditioners, and other purposes, the burst pressure should meet the requirements of the table below. When the purchaser has special requirements or the product is used for other purposes, the supplier and buyer can negotiate to determine the burst pressure.
3,The Product features of 3102 Micro Channel Multiport Extruded Aluminium Tube
1) 3102 Aluminum micro channel Tubes has high plasticity, good welding performance, and higher strength than 1 series aluminum alloy.
2) 3102 Aluminum micro channel Tubes is a medium strength aluminum alloy with good corrosion resistance
3) 3102 Aluminum micro channel Tubes has good forming performance and good weldability
4) 3102 Aluminum micro channel Tubes has high recycling value
5) The 3102 Micro-channel Aluminum Tubes produced by our company has a small deviation range and high surface quality.
4,The Product application of 3102 Micro Channel Multiport Extruded Aluminium Tube
The 3102 Micro-channel Aluminum Tubes is widely used in the home appliance refrigeration, refrigerator freezer, vehicle refrigeration, base station cooling, industrial refrigeration, etc fields, and is specifically used in condensers and evaporators with high requirements for automotive air conditioners and civil air conditioners
5. The current product drawings of 3102 Micro Channel Multiport Extruded Aluminium Tube can be downloaded from product drawing. DOWNLOAD !
3102 aluminum alloy is an AL-Mn series alloy, which is a widely used rust-proof alumin,it has high plasticity, good welding performance, higher strength than 1 series aluminum alloy, and corrosion resistance is similar to that of 1 series aluminum alloy,is a medium-strength aluminum alloy with good corrosion resistance, so it has a wide range of uses and large amounts. It can be used to process porous microchannel aluminum flat tubes that require good forming properties, high corrosion resistance, or good weldability.
2.The Specifications of 3102 Micro Channel Multiport Extruded Aluminium Tube
The specific specifications are as follows:
1) Alloy: 3102
2) Temper: O / F / H111 / H112
3) Width: 6mm-240mm
4) Height: Above 0.8mm
5) Wall thickness:Above 0.12mm
6) Number of Ports: 2-75 Ports or according to customer drawing requirements
7) Delivery status: Coiled Flat Tubes or cut into different lengths according to customer requirements.
Length: 50-6000mm
8) The Specifications of Coiled aluminum flat tube:
Reel inner diameter: 400-550mm, etc.
Reel outer diameter: 700-1500mm, etc.
Reel height / width: 300-1000mm, etc.
Zinc layer weight: 6-8g / ㎡ or according to customer requirements
9) The product specification deviations see as below (The cross-sectional views see as below):
| The deviation of Product specification | |
|
Specification W(Width) x H(Height）x L(Length） |
Allowable deviation （mm） |
| W(Width) :6mm-240mm | ± 0.2mm max |
| H(Height）:Above 0.8mm | ± 0.1mm max |
|
Plane wall thickness t1:Above 0.12mm |
± 0.1mm max |
| Support thickness: t2 | ± 0.1mm max |
| Side end wall thickness:t3 | ± 0.1mm max |
| L(Length）≤1000mm | ± 0.5mm |
| L(Length) ＞1000-2000mm | ± 1.5mm |
| L(Length) ＞2000- 6000mm | ± 2.0mm |
| Flatness | ≤0.2mm |
| Curvature(Every 300mm length） | ≤0.3mm |
| Curvature(Full length on L meter） | ≤1.0 x L(mm) |
|
Twisting degree （Full length on L meter） L ≤ 1 |
≤1.0 x L(mm) |
|
Twisting degree（Full length on L meter） L ＞ 1 |
≤1.0 (mm) |
| Note: The deviation range of product specifications can also be controlled according to customer requirements | |
10)The chemical composition of 3102 Micro-channel Aluminum Tubes is as follows:
| Alloy | Chemical component(%) | ||||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Zn | V | Ti | Ni | Other | Al | ||
| Each | Total | ||||||||||||
| 3102 |
≤ 0.40 |
≤0.70 | ≤0.10 | 0.05-0.40 | － | － | ≤0.30 | － | ≤0.10 | － | ≤0.05 | ≤0.15 | Remainder |
11)The mechanical properties of 3102 Aluminum micro channel Tubes in room temperature are as follows
| Alloy | Temper |
Tensile Strength Rm MPa |
Yield Strength Rp0.2 MPa |
Elongation A50mm % |
| not less than | ||||
| 3102 | H112 | 75 | 30 | 22 |
12)The Pressure resistance of 3102 Micro Channel Multiport Extruded Aluminium Tube
For flat tubes of water (oil) medium heat exchangers for automobile air conditioners, household or commercial air conditioners, and other purposes, the burst pressure should meet the requirements of the table below. When the purchaser has special requirements or the product is used for other purposes, the supplier and buyer can negotiate to determine the burst pressure.
| Bursting pressure Unit:MPa | ||||
| Automotive air conditioner heat exchanger | Household or commercial air-conditioning heat exchangers | Water (oil) medium heat exchangers for other purposes | ||
| Non-electric vehicle | Electric car | |||
| Condenser | Evaporator | |||
| ≥11.5 | ≥5.5 | ≥11.5 | ≥16.5 | ≥14.5 |
3,The Product features of 3102 Micro Channel Multiport Extruded Aluminium Tube
1) 3102 Aluminum micro channel Tubes has high plasticity, good welding performance, and higher strength than 1 series aluminum alloy.
2) 3102 Aluminum micro channel Tubes is a medium strength aluminum alloy with good corrosion resistance
3) 3102 Aluminum micro channel Tubes has good forming performance and good weldability
4) 3102 Aluminum micro channel Tubes has high recycling value
5) The 3102 Micro-channel Aluminum Tubes produced by our company has a small deviation range and high surface quality.
4,The Product application of 3102 Micro Channel Multiport Extruded Aluminium Tube
The 3102 Micro-channel Aluminum Tubes is widely used in the home appliance refrigeration, refrigerator freezer, vehicle refrigeration, base station cooling, industrial refrigeration, etc fields, and is specifically used in condensers and evaporators with high requirements for automotive air conditioners and civil air conditioners
5. The current product drawings of 3102 Micro Channel Multiport Extruded Aluminium Tube can be downloaded from product drawing. DOWNLOAD !
